Description
- Bonds, protects and rebuilds for a permanent repair
- Excellent sealant – perfect for patching small holes
- Waterproof – bond remains secure even when exposed to water
- Creates extra traction – can even be used on skateboards!
INSTRUCTIONS
Follow these step-by-step directions when using Shoe GOO:
DIRECTIONS – Read directions and test small area before use.
- Surface should be clean, dry and free of dirt.
- Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). However, fully cured adhesive can withstand temperatures from -40 to 180 ºF (-40 to 82 ºC) intermittently.
- Apply directly to surfaces to be protected, bonded or repaired. For waterproofing and protecting, use thin coats (spread with a disposable tool) to build a thick coating, allowing each layer to set 3-4 hours.
- Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
- For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
- Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.
Reviews
There are no reviews yet.